CDN2000-06-25 coupling decoupling network
2/54
1 DESCRIPTION 5
1.1 The different application of the CDN2000-06-25 5
1.1.1 "CWG Combination Wave Generator" 5
1.1.2 Ring wave test 0,5 µs / 100 kHz 7
1.1.3 Electric fast transient 5/50 ns 10
1.1.4 Damped Oscillatory Wave 100 kHz or 1 MHz 10
1.2 Impulse testers useably with CDN2000-06-25 12
1.2.1 MIG testers with 6 kV output voltage 12
1.2.2 Impulse testers TRA 12
1.3 Technical data 13
1.3.1 CDN2000-06-25 13
1.3.2 Block diagram CDN2000 15
1.4 Mechanical dimensions 16
1.4.1 CDN2000-06-25 Tester 16
1.5 Power supply 16
1.6 Accessories delivered with the CDN2000-06-25 17
2 SAFETY 19
2.1 Safety standards 19
2.2 Climatic Conditions 19
2.3 Precautionary measure during use 20
2.4 Electromagnetic Compatibility 20
2.5 The manual is an integral part of the equipment. Refer to the manual. 20
3 MECHANICAL STRUCTURE 21
3.1 General 21
4 PANELS OF THE CDN2000-06-25 23
4.1 Front panel of the CDN2000-06-25 23
5 PREPARATION FOR OPERATION 25
5.1 Attention, Refer to Manual 25
5.2 Operators and Service Personnel 25
5.3 Checks before operation 25
5.3.1 Optical verification of the CDN2000-06-25 25
5.3.2 EUT Power, Power source for the EUT 26
To Next Page
Loading...
