Errors 0 memory (0 uncorrectable), 0 PCI, 0 controller
Flash controller Errors 0 Cfg Err, 0 PANIC, 0 Bus Hang, 0 Bad Blk Warn,
0 Bkup Err, 0 Rstr Err
Board temperature 39 C
CPU temperature 48 C
Number of batteries 1
---- ----------------------- -------------------------------------------
NVRAM
Batteries:
Card Battery Status Charge Charging Time To Temperature Voltage
Status Full
Charge
---- ------- ------ ------ -------- ----------- ----------
-----
1 1 ok 95 % enabled 0 mins 37 C 4.044
V
---- ------- ------ ------ -------- ----------- ----------- -------
7. Enter the enclosure show misconfiguration command to verify if the NVRAM
is missing. The following example output indicates that the NVRAM is missing from
Slot 0.
# enclosure show misconfiguration
Memory DIMMs:
No misconfiguration found.
IO Cards:
Slot Device Status
---- ---------- -------
0 NVRAM missing
---- ---------- -------
CPUs:
No misconfiguration found.
Disks:
No misconfiguration found.
8. Enter the enclosure show misconfiguration command to verify if the NVRAM
is misplaced in the wrong slot. The following example output indicates that the
NVRAM is misplaced in Slot 9.
# enclosure show misconfiguration
Memory DIMMs:
No misconfiguration found.
IO Cards:
Slot Device Status
---- ---------- -------
0 NVRAM missing
9 NVRAM misplaced
---- ---------- -------
CPUs:
No misconfiguration found.
Disks:
No misconfiguration found.
Remove and install the NVRAM module
The following instructions describe how to remove and install the NVRAM module.
NVRAM Module Replacement
Remove and install the NVRAM module 5
To Next Page
Loading...
Need help?
General