Sharing Files
25
Bluetooth File Sharing
Once a Bluetooth adapter is detected, files can be uploaded to a configurable destination Share on
the StorCenter ix2-dl from a Bluetooth device.
Configuring Bluetooth settings
1. To enable Bluetooth, click the switch on.
2. Once Bluetooth Transfer is enabled, check the Enable security checkbox to require Bluetooth
users to supply a unique PIN that they have defined before allowing them to transfer files to
the destination Share on the StorCenter ix2-dl . If you have
enabled security, you must define a
unique PIN number, which will be supplied by devices attempting to upload data using
Bluetooth.
3. To set the destination Share, click
.
4. Click Apply to save your settings.
Note: To change any Bluetooth settings, click .
To Next Page
Loading...
