Storage system factory default management and service
accounts
The storage system comes with factory default user account settings to use when
initially accessing and configuring the storage system. See Table 3 on page 11.
Table 3 Factory default user account settings
Account type Username Password Privileges
Management
(Unisphere)
admin Password123# Administrator privileges for resetting
default passwords, configure system
settings, create user accounts, and
allocate storage.
Service service service Perform service operations.
During the initial configuration process, you are required to change the default
password for the Management and Service accounts.
Storage system account management
Table 4 on page 11 illustrates the ways in which you can manage the storage system
accounts.
Table 4
Account management methods
Account roles Description
Management After the storage system initial system
configuration process is complete, you can
manage the storage system management
accounts from Unisphere or the Unisphere
CLI. You can create, modify, delete, or reset
password settings for the storage system
local accounts, and assign or change roles to
accounts that determine the privileges
provided to users who use them.
Service You cannot create or delete storage system
service accounts. You can reset the service
account password from Unisphere. Under
System, select Service > Service Tasks >
Change Service Password function.
Access Control
Storage system factory default management and service accounts 11
To Next Page
Loading...
Need help?
General
