EMC VNX5500 - Page 35

System component description
VNX5500 Hardware Information Guide 35
Network management and service laptop Ethernet (RJ-45) port LEDs — Figure 25 shows
the SP Ethernet (RJ-45) port LEDs—a green LED to the left of the connector and a bi-color
(green/amber) LED to the right of the connector—that indicate the link/activity and speed
of the Ethernet ports, respectively.
Figure 25 SP Ethernet (RJ-45) port LEDs
Table 18 describes the link/activity and connection speed associated with the SP
Ethernet (RJ-45) port LEDs.
SP serial RS-232/EIA 232 (micro DB-9) socket connector
The back of the Block and File (Unified) VNX5500 platform SP CPU module includes a
standard serial Electronics Industries Association (EIA) RS-232 interface (micro DB-9)
connector (labeled with a symbol depicting a wrench on the upper left) to connect to a PC
or service laptop computer. This serial connector (port) allows you to access the SP locally
by connecting a terminal—either a PC running terminal-emulation software or an ASCII
terminal—to the port.
Notice the orientation of the pins shown in Figure 26.
Figure 26 Serial RS-232/EIA 232 (micro DB-9) connector (socket) for service laptop
12
VNX-000110
Table 18 Network management and service laptop Ethernet (RJ-45) port LEDs
Led Color State Description
Left, link
(location 1)
Green On Network/link connection
Green Blinking Transmit/receive activity
— Off No network/link connection
Right, link
speed
(location 2)
Green On 100-Mb/s connection
Amber On 1000-Mb/s (or 1-Gb/s) connection
— Off 10-Mb/s connection (if left LED is on or blinking)
Pin 1
5
6 9
VNX-000079