32 VNX5700 Hardware Information Guide
System component description
Figure 20 2U SPS RJ-12 port
Table 14 lists the 2U SPS (RJ-12) pin signals used on the connector.
RJ-12 modular jack to micro DB-9 cable
The cable connecting the 2U SPS to the SP is an RJ-12 to micro DB-9 cable (plug). It has an
RJ-12 connector (SPS side) on one end and a micro DB-9 connector (SP side) on the other
end. Figure 21 shows an example of an SPS A to SP A cable.
Figure 21 Example of SP A (micro DB-9) SPS (RJ-12) cable
VNX-000626
Table 14 2U SPS (RJ-12) port and connector pinout
RJ-45 pin Signal Description
1 RTS/DSR Ready to send Data transmit
ready
2 Shield Shield
3TXDTransmit data
4RXDReceive data
5GNDGround
6 CTS/DCD Clear to send Data
VNX-000283
To Next Page
Loading...
