I/O modules
VNX5700 Hardware Information Guide 57
Four-port 1-Gb/s copper I/O module
The four-port 1-Gb/s copper I/O module comes with four copper ports, one power/fault
LED, and a link and activity LED for each copper port (Figure 49). This I/O module can
interface at speeds of 10 Mb/s, 100 Mb/s, and 1000 Mb/s (1 Gb/s). Another way to
describe this type of module is that it runs Ethernet over twisted pair.
Figure 49 Four-port 1-Gb/s copper I/O module
1. Refer to the
VNX5700 Parts Location Guide
for the correct SFP+ part number.
1 Push button latch handle 4 RJ-45 link LED
2 Power/fault LED 5 RJ-45 activity LED
3 RJ-45 (copper) port (four)
1 2
3
4
5
CNS-001751
To Next Page
Loading...
