EasyManua.ls Logo

Emec AMS 0340 - User Manual

Default Icon
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
EN
AMS - AMSA - AMS AC
OPERATING MANUAL
AMS
AMSA
AMS AC
PRODUCT LABEL
SOLENOID DRIVEN METERING PUMPS
WITH DIAPHRAGM

Questions and Answers

  • H
    Holly ArmstrongAug 9, 2025
    How to troubleshoot Emec Water Pump that doesn't turn on?
    • S
      Shawn FloresAug 9, 2025
      If your Emec Water Pump doesn't turn on, the possible causes are: * It isn’t connected to the main power supply. Ensure the pump is properly connected to the main supply. * The pump’s protection fuse is broken. Replace the broken fuse. * The pump’s main board is broken. Replace the main board.
  • T
    tiffany73Aug 19, 2025
    What to do if Emec AMS 0340 is not dosing but solenoid is operating?
    • D
      dhernandezAug 19, 2025
      If the Emec Water Pump solenoid is operating but the pump isn't dosing, consider these possibilities: 1. The foot filter may be obstructed. Clean the foot filter. 2. The suction hose may be empty, meaning the pump needs priming. Repeat the priming procedure. 3. There might be air bubbles inside the hydraulic circuit. Check the valves, hoses, and fittings. 4. The product being dosed could be generating gas. Turn the venting knob to let air flow away, or consider using a self-venting pump head.
  • X
    xnovakAug 30, 2025
    Why Emec AMS 0340 Water Pump is not dosing and solenoid isn’t operating?
    • F
      floresdavidAug 30, 2025
      If your Emec Water Pump isn't dosing, and the solenoid either isn’t operating or is only slightly operating, it could be due to: * Crystals inside the valves. Check the valves and try dosing 2-3 liters of normal water. * The injection valve is obstructed. Replace the injection valve.

Summary

General Safety Guidelines

Purpose of Use and Safety

Introduction to AMS Pumps

Pump Description and Adjustment

Pre-Installation Warnings

Protective Clothing Requirements

Emphasizes wearing appropriate protective clothing during installation and handling.

Installation Location Criteria

Specifies requirements for the pump's installation location and stability.

Hoses and Valves Installation

Details correct installation procedures for hoses and valves to ensure proper function.

Hydraulic Installation Guide

Self-Venting Pump Head Installation

Electrical Installation Procedures

Verify Power Supply Compatibility

Ensures pump's electrical specifications match the main power supply for safe operation.

Differential Switch Requirement

Mandates a differential switch for grounding safety or if ground connection is absent.

Level Alarm and Pump Models

Priming Procedure

Troubleshooting Common Issues

Pump Does Not Turn On

Addresses issues related to the pump failing to power on, with potential causes.

Pump Not Dosing (Solenoid Operating)

Solves problems where the pump is not dosing but the solenoid is active.

Pump Not Dosing (Solenoid Not Operating)

Troubleshoots issues where the pump and solenoid are not operating correctly.

Fuse and Main Board Replacement

Main Board Diagrams

Maintenance Schedule and Procedures

Construction Materials and Technical Information

Chemical Compatibility Table

Emec AMS 0340 Specifications

General IconGeneral
BrandEmec
ModelAMS 0340
CategoryWater Pump
LanguageEnglish

Related product manuals