43
Index
Information on this manual may contain technical inaccuracies or typographical errors.
The information contained may be changed at any time without prior notication or obligation.
1. Introduction ........................................................................................ 3
2. The wheel ............................................................................................ 3
3. Board connectiones ............................................................................. 4
4. Main view ........................................................................................... 5
5. Status check ........................................................................................ 6
6. Password .............................................................................................7
7. “Main Menu” ..................................................................................... 8
8 “Set-Point”, Cl (On/Off)........................................................................ 9
8.1 “Set-Point”, Cl (on/off) ...................................................................... 9
8.2 “Set-Point”, Cl (proportional) ........................................................... 10
8.3 “PWM” Proportional, Cl .................................................................... 11
8.4 “PWM” (fixed), Cl ............................................................................. 12
8.5 “PID”, Cl ........................................................................................... 13
9 “Probe Calibration”, C ......................................................................... 14
10. “Parameters” .................................................................................... 16
11. “Output Manager” ............................................................................17
12. “Instrument Reset” ........................................................................... 18
13. “Dosing Alarm” .................................................................................19
14. “International”..................................................................................20
15. “Probe Failure” ................................................................................. 21
16. “Flow Contact” ................................................................................. 22
17. “Service” ..........................................................................................22
18. “mA Outputs” ...................................................................................23
19. “Out of range alarm” ........................................................................ 24
20. “Self Clean” ...................................................................................... 25
21. “Circulator pump” ........................................................................... 26
22. Technical Information ........................................................................ 27
23. SEPR configuration ............................................................................ 28
24. “Water Meter” .................................................................................. 29
25. “Feed Forward” and mA module .......................................................30
Appendice - Compensation .....................................................................32
Appendice - MDCL6 module ...................................................................32
Appendice - Dimensioni .......................................................................... 33
Appendice - “Module SMS/GSM” .......................................................... 34
Appendice - “Module USB for data log” ................................................35
Appendice - “Communication” ..............................................................36
Appendice - MODBUS ............................................................................. 40
Appendice - WiFi ..................................................................................... 41
To Next Page
Loading...
