Emerson 1420 Quick Installation Guide

Quick Installation Guide
00825-0100-4420, Rev DA
July 2009
1420 Wireless Gateway
4
c. Select Internet Protocol (TCP/IP), then click the Properties button
d. Select the Use the following IP address button and set the IP address to
192.168.1.12
e. Set the Subnet Mask to 255.255.255.0
f. Select OK for each of the settings windows that have opened.
3. Using the supplied crossover Ethernet cable, attach your PC/laptop to the 1420’s
P1 Ethernet Receptacle (far right Ethernet receptacle).
WARNING
Do not connect to the Power Over Ethernet (POE) port. This port supplies power and
could potentially damage the PC/laptop.
+ +
+
+
+
-
-
-
-
-A B
S S
S S
S
24 V DC24 V DC
Power InputPower Input
ModbusModbus
Not UsedNot Used
Not UsedNot Used
Not UsedNot Used
Not UsedNot Used
CaseCase
S
POEPOE
P2P2 P1P1
P1 Ethernet
Receptacle
Crossover Cable
PC/Laptop
00825-0100-4420_Rev_DA.fm Page 4 Friday, July 17, 2009 10:15 AM

Emerson 1420 Specifications

General

Brand	Emerson
Model	1420
Category	Gateway
Language	English