Need help?Do you have a question about the Emerson 1410S and is the answer not in the manual?
General| Model | 1410S |
|---|---|
| Category | Gateway |
| Power Supply | 24 VDC |
| Operating Temperature | -40°C to 70°C |
| Protocols Supported | HART, WirelessHART |
| Enclosure Rating | IP66 |
| Communication Ports | Ethernet |
Covers explosion, electrical shock, electrostatic hazards, repair, and physical security.
Mentions caution for improper use and notice regarding external IP54 for 1410S1.
Covers power-up sequence, gateway redundancy, and firmware compatibility.
Lists operating system, applications, and hard disk space needed for PC setup.
Guides through connecting PC to gateway via Ethernet using Windows 10 and IP configuration.
Accessing the gateway's default web page and logging in with default credentials.
Configuring primary and secondary interface IP addresses and network settings.
Instructions for changing gateway admin, operator, maintenance, and executive passwords.
Describes how to snap the 1410S1 Gateway onto a DIN TS35/7.5 or TS35/15 rail system.
Details pipe mounting using u-bolts and surface mounting with fasteners.
Instructions for wiring the gateway to power and the 781S Smart Antenna.
Explains grounding for 1410S1 and 1410S2 models, including best practices.
Instructions for installing optional software like Security Setup Utility and AMS Wireless Configurator.
Steps to verify gateway and field device operation through the web interface.
Lists certifications for USA, Canada, and Europe, including ATEX and IECEx standards.
To Next Page
