6 Verify operations
Operation is verified through the web interface by opening a web browser
from any PC on the host system network and entering the gateway IP
address or DHCP host name in the address bar.
Log in using credentials set in Section 3-5.
Procedure
1. Ensure field devices to be used with each network have the Network
ID and Join Key that can be found on the gateway’s Network Settings
Page.
2. Verify field devices are joined to the network and displayed on the
Devices page of the gateway web interface.
3. Verify host system is receiving field device data.
Quick Start Guide July 2022
28 Emerson.com
To Next Page
Loading...
