10
Setting The Clock
When you connect the radio to your AC outlet for the first time, the display will
begin flashing “12:00” AM. The flashing will stop when you set the time.
1.) Depress the CLOCK button together with the HOUR button to set the display
to the correct Hour.
2.) Depress the CLOCK button together with the MINUTE button to set the display
to the correct Minute.
Note: Observe the AM indicator to make sure you have set the clock to the correct
hour, AM or PM. If the AM indicator is ‘On’ the time displayed is AM. If the AM
indicator is ‘Off’ the time displayed is PM.
OPERATING INSTRUCTIONS
AM indicator
CK5029_030405.p65 4/3/2005, 15:0810
To Next Page
Loading...
