12
Listening To The Radio
Note: Set the clock before turning the radio ‘On’ for the first time.
1.) Set the BAND selector to the desired band, AM or FM.
2.) Set the VOLUME control to a low setting.
3.) Set the OFF-ON-BUZZ-AUTO selector switch to the “ON” position to turn the
radio ‘On’.
4.) Select your desired station with the TUNING control.
5.) Adjust the VOLUME control to the desired setting.
6.) When you are finished listening, set the OFF-ON-BUZZ-AUTO selector switch
to the “OFF” position to turn the radio ‘Off’.
Antenna Information
AM
The AM bar antenna is inside the cabinet. If AM reception is weak, change the
position of cabinet until the internal antenna picks up the strongest signal.
FM
The FM antenna is built in to the AC power cord. If FM reception is weak try varying
the position and direction of the power cord until you find the strongest signal.
CK5029_030405.p65 4/3/2005, 15:0812
To Next Page
Loading...
