Emerson CKD9901 - Alarm Operation; Wake To Buzzer

19
Alarm Operation
This unit gives you the option of waking to an electronic Buzzer alarm, the AM/FM
Radio, or the CD player.
Notes:
A.) Whichever alarm mode you select – BUZZER, CD or RADIO – will apply
to both alarms. Refer to “Setting The Wake Up Times” on page 10. Adjust
the wake up time(s) if necessary.
B.) If you have any external device connected to the AUX IN jack, the alarm
will automatically default to the Buzzer, even though the FUNCTION
selector may be set to the RADIO or CD position.
Wake To Buzzer
1.) Set the FUNCTION selector to BUZZER position.
2.) Press the ALARM 1 and/or ALARM 2 buttons. The respective Alarm time
flashes for few seconds, then returns to correct time.
The ALM 1, ALM 2 or both indicators come
“On”.
3.) At the selected wake up time the electronic
Buzzer turns “On”. The ALM indicator
flashes.
It will continue for 60 minutes and then turn “Off” and reset itself for the following
day.
4.) To stop the buzzer immediately, press the POWER button. The Buzzer stops
and the alarm resets itself for the following day.
5.) To cancel the alarm completely press the ALARM 1 and/or ALARM 2 buttons
once to turn “Off”. The respective ALM indicator disappears.
REPEATPROGRAM
RANDOM POWER
FM ST.
ALM 2
ALM 1
PM
REPEATPROGRAM
RANDOM POWER
FM ST.
ALM 2
ALM 1
PM
CKD9901_F112905.p65 29/11/2005, 11:3019