Emerson COPELAND ZX Series - Page 11

11
11
Exact Timing of the Alarm
Upload the Program from the Controller to Hot-Key
Step Action Phenomenon and Description
1
Press “
”
Display “SEC”
2
Press “
”
Display “A01”
3
Press “
”
Display alarm code in “A01”
4
Press “
”
Display “Hr”
5
Press “
”
Display the alarm exact timing: hour
6
Press “
”
Display “Min”
7
Press “
”
Display the alarm exact timing: minute
8
Press “
”
Display “dAy”
9
Press “
”
Display the alarm exact timing: day
10
Press “
”
Display “Mon”
11
Press “
”
Display the alarm exact timing: month
12
Press “
”
Display “yEA”
13
Press “
”
Display the alarm exact timing: year
14
Press “
” + “ ”
Exit (or exit automatically after waiting for 15 seconds)
Step Action Phenomenon and Description
1
Insert Hot-Key when the
controller is ON
2
Press “
”
The “uPL” message appears followed a by a ashing “End” label
(Note: if display “Err”, it means it fails to upload program to Hot-Key.
Please restart the process.)
3
Press “
”
“End”will stop ashing
4
Turn-off the controller
and remove Hot-Key
5 Turn-on the controller