Emerson COPELAND ZX Series - Controller Parameter Settings and Modification; Adjusting Condensing Temperature Set-point

9
Adjusting condensing temperature set-point
Step Action Phenomenon and Description
1
Press “
” +
Enter menu to select “PAr” (parameter) or “rtC”
2
Press “
” or “ ”
Select “PAr (parameter)”
3
Press “
”
4
Press “
” or “ ”
Browse to t18 parameter
5
Press “
”
Enter password 321
6
Press “
” or “ ”
Browse to parameter E39
Enter desired condensing temperature
7
Press “
”
8
The number will flash for 3 seconds and confirm the
modifications; will go to the next parameter
9
Press “
” +
Exit (or exit automatically after waiting for 120 seconds)
Press “
”