Do you have a question about the Emerson Coresense Diagnostics and is the answer not in the manual?
Category | Diagnostic Equipment |
---|---|
Power Supply | 24 VDC |
Communication Protocol | HART |
Operating Temperature Range | -40°C to +85°C |
Enclosure Rating | IP66 |
Explains the meaning of DANGER, WARNING, and CAUTION icons used in the document.
Details electrical shock, pressurized system, burn, and handling hazards.
Introduces the CoreSense Diagnostics module for troubleshooting HVAC systems.
Lists available module part numbers and their configurations (two-wire/three-wire).
Specifies compatible compressor models and limitations.
Details operating temperature, storage, and supply voltage requirements.
Instructions for mounting the module and routing wires.
Explains the function of each terminal (C, Y, PROT, R).
Explains how the module protects the compressor from repeated trips.
Describes the status indicated by the RUN/ALERT (Yellow) and TRIP/LOCK (Red) LEDs.
Details the meaning of different flash codes for alerts and lockouts.
Explains how to clear alert codes and reset the module.
Describes how to download fault history using PC software.
Provides information on product warranty and customer support contacts.