1592015610 User manual IC200D EVO GB rel1.0 10.11.2015_rev10 IC200D 35/192
o write the PASSWORD
o press SET
o press ENTER
How to disable a compressor:
o press or to select the status of the compressor (Enabled in the “Status” column);
o press for 5 seconds
o press or to select the status “Disabled”
o press for 5 seconds to confirm the operation
How to reset working hours:
o press or keys to select RST;
o press RESET
o press SET
o write the PASSWORD
o press SET
o press ENTER
Press to disable the circuit for maintenance; all the compressor will be switched off after disabling the
circuit.
How to disable a circuit:
o press or to select the circuit to disable
o press for 5 seconds
o press or to select the status “Disabled”
o press for 5 seconds to confirm the operation