SIL Safety Manual
DOC.SILM.EF.EN Rev. 1
Table of Contents
September 2018
ITable of Contents
Table of Contents
Section 1: Introduction
Section 2: Functional Specification
Section 3: Configuration of the Product
Section 4: Service Condition Limitations (Limitation of Use)
Section 5: Expected Lifetime
Section 6: Failure Modes and Estimated Failure Rates
Section 7: Installation and Site Acceptance Procedure
Section 8: Periodic Test and Maintenance Requirements
8.1 General ...................................................................................................... 9
8.2 Full-Stroke Test .......................................................................................... 9
8.3 Partial-Stroke Test .................................................................................... 12
8.4 Proof Test and Periodic Maintenance ........................................................ 15
Section 9: Architectural Constraints
Section 10: Common Cause Factors
Section 11: Mean Repair Time
Section 12: Systematic Capability
To Next Page
Loading...
Need help?
General
