What to do if timer recording is impossible on Emerson EWD2004?
If timer recording is impossible on your Emerson DVD VCR Combo, ensure the timer recording is set correctly. Make sure the TIMER REC light appears on the DVD/VCR by pressing the SUBTITLE/T-SET button. Also, verify that the VCR clock is set correctly.
What to do if my Emerson EWD2004 DVD VCR Combo cannot go into Record mode?
If your Emerson DVD VCR Combo cannot go into Record mode, make sure the tape has a safety tab. If needed, cover the hole with cellophane tape. Activate the unit in VCR mode by pressing the VCR button on the remote control so that the green VCR OUTPUT light is lit.
What to do if TV programs cannot be seen normally on Emerson EWD2004 DVD VCR Combo?
If TV programs cannot be seen normally on your Emerson DVD VCR Combo, re-check the ANT. IN and ANT. OUT connections. Press the VCR/TV button. You may also need to press the VCR button on the remote control to activate it in the VCR mode and check if the green VCR OUTPUT light is lit, then set it to the TV position by pressing the VCR/TV button.
What to do if my Emerson EWD2004 DVD VCR Combo has no picture?
If your Emerson DVD VCR Combo shows no picture, ensure the video cables are firmly connected. Also, insert a correct video disc that plays on the unit. Press the DVD button on the remote control and check if the DVD OUTPUT light is lit, then try other DVD features.
What to do if my Emerson EWD2004 DVD VCR Combo cannot play a disc?
If your Emerson DVD VCR Combo cannot play a disc, first ensure that a disc is inserted. Then, clean the disc and place it correctly with the label side up. Finally, cancel the parental lock or change the control levels, and handle the disc with care to avoid fingerprints, scratches, or dust.
What to do if my Emerson DVD VCR Combo has no sound?
If there is no sound from your Emerson DVD VCR Combo, make sure the audio cables are firmly connected. Also, check that the power of the audio component is on, the audio output settings are correct, and the input settings on the audio component are properly configured.
Why does my Emerson EWD2004 have no power?
If your Emerson DVD VCR Combo has no power, ensure the power plug is securely connected to an AC outlet and that the power is turned on.
General| Type | DVD VCR Combo |
|---|---|
| Video Format | NTSC |
| Recording Formats | VHS |
| Remote Control | Yes |
| Playback Formats | DVD |
| Connectivity | Composite Video Output |
To Next Page
