1-10-11 E9400FIS
FUNCTION INDICATOR SYMBOLS
< VCR Section >
Note:
The following symbols will appear on the indicator panel to indicate the current mode or operation of the VCR.
On-screen modes will also be momentarily displayed on the tv screen when you press the operation buttons.
TV screen
Note:
OSD for mechanical error will be displayed for 5 sec. after the mechanical error occurs.
When reel and capstan mechanism is not functioning
correctly
When tape loading mechanism is not functioning cor-
rectly
When cassette loading mechanism is not functioning
correctly
When the drum is not working properly
P-ON+5V Power safety detection
Led Mode Indicator Active
When reel and capstan mechanism is not
functioning correctly
“A R” is displayed on a TV screen. (Refer to Fig. 1.)
When tape loading mechanism is not
functioning correctly
“A T” is displayed on a TV screen. (Refer to Fig. 2.)
When cassette loading mechanism is not
functioning correctly
“A C” is displayed on a TV screen. (Refer to Fig. 3.)
When the drum is not working properly
“A D” is displayed on a TV screen. (Refer to Fig. 4.)
P-ON+5V Power safety detection
“A P” is displayed on a TV screen. (Refer to Fig. 5.)
A
R
SP 0:00:00
Fig. 1
A
T
SP 0:00:00
Fig. 2
A
C
SP 0:00:00
Fig. 3
A
D
SP 0:00:00
Fig. 4
A
P
SP 0:00:00
Fig. 5
To Next Page
Loading...
