Emerson FB3000 Quick Start Guide

Emerson FB3000 RTU Quick Start Guide
D301859X012
April 2021
17
 TechView and other components of BSI_Config software cannot be installed on a
computer running OpenBSI Network Edition versions older than 5.9 Service Pack 2.
 You must have administrative privileges to install Field Tools.
 You must disable User Account Control (UAC) prior to installing Field Tools (you can re-
enable it after a successful installation).
 As part of the installation, software from both Eltima and MACTek
®
is automatically installed.
Depending upon your permissions, Windows may require you to confirm these installations
before the installation can proceed.
1. Right click on the installer file and choose Run as administrator from the pop-up menu.
2. Follow the on-screen instructions. For details on minimum hardware/software requirements
as well as more details on the installation steps see the Field Tools Quick Start Guide
(D301703X412).
Note
During Field Tools installation, you must select the FBx support including FBxConnect option.
If you purchased FBxDesigner, you should also select the
FBxDesigner -FBx Application
Development option.
3. After software installation re-boot, start Field Tools from either the Windows Start Programs
menu or (if you created it) from the desktop icon.
4. Log onto Field Tools.
Important
The very first time you login with Field Tools, use the default username of admin and leave
the
password field blank. Then assign a new password when prompted. See the Field Tools
Quick Start Guide (D301859X012) for any questions you have on changing default passwords
after installation.

Emerson FB3000 Specifications

General

Brand	Emerson
Model	FB3000
Category	Touch terminals
Language	English