133 Series
10
APPLY PTFE SEALANT TO THREADS
AND INSTALL WITH CONTROL LINE
CONNECTION POINTING AWAY FROM
THE CASING ADAPTOR
1/4-INCH NPT CONTROL
LINE CONNECTION
A7008/IL
Figure 8. Lower Casing and Casing Adaptor Assembly
WHEN ASSEMBLING THE ACTUATOR, THE
UPPER CASING AND ADAPTER SHOULD
BE POSITIONED SO THAT TWO HOLES
IN THE 5-1/4-INCH (133 mm) BOLT HOLE
CIRCLE ARE EQUALLY SPACED OVER THE
CONTROL CONNECTION.
A7009/IL
Figure 9. Diaphragm Casing Assembly
53
7
6
19
54
60
32
39
51
To Next Page
Loading...
