Emerson FISHER 657 - Parts and Ordering; Parts Ordering; Kits for Side-Mounted Handwheels; Kits for Top-Mounted Handwheels

Instruction Manual
D100306X012
657 Actuator (30/30i-70/70i and 87)
June 2018
22
Parts Ordering
Each actuator has a serial number stamped on the nameplate. Always mention this number when corresponding with
your Emerson sales office
or Local Business Partner regarding technical information or replacement parts. Also,
reference the complete 11‐character part number of each needed part as found in the following Parts List.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts Kits
Kits for Side‐Mounted
Handwheels
Retrofit kit includes parts to add a side‐mounted handwheel.
Description Part Number
Size 34 push down to close 30A8778X0A2
Size 34 push down to open 30A8778X0B2
Size 40 push down to close 30A8778X0C2
Size 40 push down to open 30A8778X0D2
Size 45 & 46 push down to close 40A8779X0A2
Size 45 & 46 push down to open 40A8779X0B2
Size 50 & 60 push down to close 40A8779X0C2
Size 50 & 60 push down to open 40A8779X0D2
Size 34i push down to close GE71635X0A2
Size 34i push down to open GE71635X0B2
Size 40i push down to close GE71635X0C2
Size 40i push down to open GE71635X0D2
Size 45i & 46i push down to close GE71636X0A2
Size 40i & 60i push down to open GE71636X0B2
Size 50i & 60i push down to close GE71636X0C2
Size 50i & 60i push down to open GE71636X0D2
Transition Kits for Side‐Mounted
Handwheels
Transition kits include fasteners necessary to remount an existing
side-mounted handwheel to an actuator where the yoke has been
changed to a size i yoke.
Contains key numbers 256, 257, and 258.
Description Part Number
Size 34i/40i push-down-to-close or
push-down-to-open GE71635X0J2
Size 45i - 60i push-down-to-close or
push-down-to-open GE71636X0E2
Kits for Top‐Mounted Handwheels
Retrofit kit includes parts to add a top‐mounted handwheel. Kit 1
includes the handwheel assembly only. Kit 2 includes kit 1 and a new
diaphragm case that is required to mount the handwheel assembly.
Description Part Number
KIT 1
Size 30/30i 28A1205X012
Sizes 34/34i & 40/40i 28A1205X022
Sizes 45/45i, 50/50i, & 60/60i 28A1205X032
Sizes 70/70i & 87 CV8010X0032
KIT 2
Size 30/30i 28A1205X042
Sizes 34/34i & 40/40i 28A1205X052
Sizes 45/45i & 50/50i 28A1205X062
Sizes 46/46i & 60/60i 28A1205X072
Sizes 70/70i & 87 CV8010X0042