Emerson Fisher 95H User Manual

Types 95L, 95H, 95HP, and 95HT
D100256X012
Instruction Manual
Form 1151
November 2009



W1888 W1888 W5652
Figure 1. Type 95L NPT Body (Left), Type 95H NPT Body (Middle),
and Type 95H Flanged Body (Right) Pressure Reducing Regulators
!
Warning







®















Types 95L, 95H, 95HP, and 95HT direct-operated
pressure regulators are suitable for pressure control of
steam, air, gas, water, oil, and similar uids requiring
constant outlet pressures between 2 and 400 psig
(0,14 and 27,6 bar). Typical 95L and 95H regulators
are shown in Figure 1.

—Pressure reducing regulator suitable for
controlling many gases and liquids. Cast Iron, Steel, or
Stainless steel bodies are available. Outlet pressure
range is from 2 to 30 psig (0,14 and 2,1 bar) with three
different springs available. Body sizes are available

Emerson Fisher 95H Specifications

General

Brand	Emerson
Model	Fisher 95H
Category	Controller
Language	English

Summary

Product Information

Safety Warnings

Critical safety instructions for operation and maintenance.

Product Overview

General introduction and description of pressure reducing regulators.

Technical Specifications

Configurations, Sizes, and Connections

Details on available types, body sizes, orifices, and end connections.

Pressure and Temperature Limits

Information on pressure/temperature limits, materials, and product weights.

Operational Settings and Weights

Details on setting adjustments, shutoff classification, and approximate weights.

Operation

Principle of Operation

Explanation of how the pressure reducing regulator functions.

Installation and Startup

Procedures for proper installation, venting, and initial startup.

Pressure Adjustment

Instructions for adjusting the outlet pressure.

Shutdown and Maintenance

Shutdown Procedures

Method for safely shutting down the regulator.

Maintenance Safety and Procedures

Essential safety precautions and steps for maintenance.

Parts and Ordering

Parts Ordering Information

Guidance on how to order replacement parts.

Parts List

Identification and part numbers for regulator components.