Emerson Fisher MR95 Series - Page 8

MR95 Series
8
BODY SIZE
BODY
CONSTRUCTION
END CONNECTION
BODY MATERIALS
Gray Cast Iron
(1)
LCC or WCC Steel
CF8M Stainless Steel CF3M Stainless Steel
Monel
®
or Hastelloy
®
C
Aluminum-Bronze
1-inch / DN 25
With Control Line but Without Gauge Port
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
With Gauge Port but Without Control Line
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
1-1/2-inch / DN 40
Without Gauge Port and Control Line
NPT
SWE
Welded CL150 RF
Welded CL300 RF
Welded CL600 RF
Welded PN 16/25/40 RF
With Control line but Without Gauge Port
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
With Gauge Port but Without Control Line
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
2-inch / DN 50
Without Gauge Port and Control Line
NPT
SWE
Welded CL150 RF
Welded CL300 RF
Welded CL600 RF
Welded PN 16/25/40 RF
Integral CL150 RF
Integral CL300 RF
Integral CL600 RF
Integral PN 16/25/40 RF
With Control Line but Without Gauge Port
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
With Gauge Port but Without Control Line
NPT
Welded CL150 RF
Welded CL300 RF
Welded PN 16/25/40 RF
- Shaded areas indicate that the construction is available.
- Blank areas indicate that you need to contact your local Sales Ofce for the availability of the constructions.
1. Gray cast iron body material is available for Types MR95H and MR95HD only.
Monel
®
is a mark owned by Special Metals Corporation.
Hastelloy
®
C is a mark owned by Haynes International, Inc.
Table 2. Types MR95H, MR95HD, MR95HT, and MR95HP Regulators Body Constructions (continued)