Emerson IC695PNC001-BFBE1 2 Quick Start Guide

Quick Start Guide Section 1
GFK-2941K Sep 2019
User Features 5
Run I/O
The CPU runs with I/O
sweep enabled.
User program memory is
read only.
Run
The CPU runs with
outputs disabled.
User program memory is
read only.
Stop
The CPU is not allowed to
go into Run mode.
User program memory can
be written.
The Run/Stop switch is enabled by default; it can be disabled in the PME Hardware
Configuration (HWC) settings. The memory protection function of this switch can be
disabled separately in HWC. The memory protection functionality is disabled by
default.

Emerson IC695PNC001-BFBE1 2 Specifications

General

Brand	Emerson
Model	IC695PNC001-BFBE1 2
Category	Controller
Language	English