Emerson LC320EM8 - V-CHIP PASSWORD MANAGEMENT

30
EN
4 Display the “New Password” screen.
• Using
[
K
/
L
], select “New Password”.
• Press
[ENTER].
5 Change the password.
• Use
[the Number buttons] on the remote con-
trol and enter the NEW 4-digit password.
• Enter password again in “Confirm password”
space.
6
To exit the setup, press [SETUP].
NOTES:
• Make sure to enter the exact same new password as the
“Confirm password.”. If they are different, the space is
cleared for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs or when you turn off the
power using a wall switch. If you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
V-Chip
V-Chip
PIN Code
Back
BACK
Confirm password.
Enter password.
V-Chip
V-Chip
MPAA Rating
TV Rating
New Password
C
New Password