28
English
fun-Link (HDMI CEC)
This function allows you to operate the linked functions between our
brand devices with a fun-Link feature and this unit connecting through an
HDMI cable. You must connect this unit to our brand fun-Link devices
and be sure its fun-Link (HDMI CEC) setting is also set to On.
1 Use ɼɾ to select fun-Link (HDMI CEC), then press OK.
2 Use ɼɾɿɽ to select the item you want to adjust, then press
OK.
Set the fun-Link control On or Off. The following additional settings will
be grayed out when you set them to Off.
You can set your connected fun-Link Device to Turn Off by interlocking
from this Unit’s Power.
This unit will Turn On when the Power On signal is sent from your
connected fun-Link device.
Device list
This function lets you see the product model number or name of
connected devices.
Use ɼɾ to select the desired fun-Link devices listed on the TV screen,
then press OK.
Your connected fun-Link device will be Turned On if the device is in
Stand by mode.
fun-Link control
Off
Disables all fun-Link.
On
Selects if you have connected an external
device that is compatible with the fun-Link
function.
Auto device off
Off
Your connected fun-Link Device stays On
even if the Unit goes into Standby mode.
On
Your connected fun-Link Device Turns
Off automatically when the Unit goes
into Standby mode.
Auto TV on
Off
This Unit stays in Standby mode even if
you Turn On your connected fun-Link
Device.
On
This Unit Turns On automatically when
you Turn On your connected fun-Link
Device.
Picture
Sound
Setup
Features
Language
USB
fun-Link control
Auto device off
Auto TV on
Device list
On
On
On
Picture
Sound
Setup
Features
Language
USB
HDMI1
HDMI2
Input Change Refresh Back
DVD recorder
Blu-ray disc player
Continued on next page.
To Next Page
Loading...
Need help?
General
