39
Special Functions
Timer Operation
This system includes a programmable TIMER function. You can use the timer to
wake you up to the Radio or to your favorite CD.
The timer can only be programmed while the system is in the Standby (Power Off)
mode.
1.) Press the TIMER/SLEEP button once,
The TIMER indicator appears and the
Hour digits will begin flashing in the display.
2.) Press the or button to set the
display to the desired turn on hour, AM or
PM.
3.) Press the TIMER/SLEEP button. The
Minute digits begin flashing.
4.) Press the or button to set the
display to the desired turn on minute.
5.) Press the TIMER/SLEEP button. The TU indicator begins flashing. Press the
or button to switch between TU (Tuner) or CD mode.
6.) Press the TIMER/SLEEP button.
The VOL 20 indicator begins flashing.
Press the or button to adjust the
turn ‘On’ volume level as desired.
MS3111M_112306.p65 23/11/2006, 10:4439
To Next Page
Loading...
