Emerson PACSystems RX3i - Page 11

PACSystems™ RX3i and RSTi-EP CPU Reference Manual Section 1
GFK-2222AK October 2019
Introduction 3
Rev
Date
Description
AB
Oct-
2017
▪ Added Redundancy features for CPE400
▪ Updated Field Agent information for CPE400.
▪ Updated Section 2.2 for new features of CPE400.
▪ Added Section 2.1.10 on CPU Over-Temperature behavior.
AA
Sep-
2017
▪ Addition of support for Media Redundancy Protocol (MRP) on CPE100.
Z
May-
2017
▪ Addition of RSTi-EP EPSCPE100 (new product) and updated other relevant sections.
▪ Addition of Simple Network Time Protocol (SNTP), Coordinated Universal Time
(UTC), and Daylight Savings Time (DST) features forCPE305, CPE310, CPE330, and
CPE400.
Y
Dec-
2016
▪ Added section on CPE400 and incorporated into CPU comparison table
(section 2.2). This section also introduces Field Agent and documents how to set up
Embedded Field Agent for the CPE400 (section
▪ Added section 2.1.5, Embedded PROFINET Controller.
▪ Update of Energy Pack Section 4.10.3.3 to include ACC403 and compatibility
matrix.
▪ Added compatibility mode information for CPE330 with CPU320 & CRU320
X
Feb-
2016
▪ Corrected Ethernet Indicators CPE305 & CPE310 table.
W
Aug-
2015
▪ Addition of support for Ethernet Global Data (Class 1) on CPE330
V
Jun-
2015
▪ Addition of RX3i CPE330 (new product) and related Ethernet considerations.
▪ Update of Energy Pack Section 4.10.3.3 to include ACC402 and compatibility
matrix.
▪ Addition of HART® Pass Through feature (see page 9).
▪ Addition of CPU Comparison Charts
▪ Update of Communications Section (Section 5:). Added Serial Port Electrical
Isolation.
▪ Removed original Sections 5-11 (Sections dealing with CPU programming) and
Section 14 (Diagnostics). These are now in PACSystems RX3i CPU Programmer’s
Reference Manual, GFK-2950 (Sections 2-8 and Section 9 respectively).