Need help?Do you have a question about the Emerson PACSystems RX3i and is the answer not in the manual?
General| Brand | Emerson |
|---|---|
| Model | PACSystems RX3i |
| Category | Controller |
| Language | English |
Details features shared across all PACSystems CPU models, including programming, memory, and communication capabilities.
Provides step-by-step instructions for transferring a project from the CPU to a Removable Data Storage Device.
Outlines the procedure for transferring a project from an RDSD to the CPU, including options for modification.
Presents a detailed comparison of RX3i CPU models, including lifecycle, memory, power, and communication features.
Details the features and specifications of RSTi-EP CPE100/CPE115 CPUs, including memory, power, and communications.
Guides on configuring the CPU using PACMachine Edition, including parameter setup and storing configurations.
Explains the process of transferring a configuration file from the programmer to the CPU via serial or Ethernet.
Details how to configure the embedded Ethernet interface, including IP address assignment and network settings.
Details the four RUN/STOP modes of operation and their effects on program execution and memory protection.
Covers system security features including passwords, privilege levels (Legacy/Enhanced), and OEM protection.
Explains activating serial protocols using COMMREQ function, including examples and timing.
Describes the RTU protocol for host-to-slave communication, including message formats and error checking.
To Next Page