5. Connect the cable wires (see Figure 4-1, Figure 4-5, and Figure 4-6).
6. Ensure proper grounding (see Grounding).
7. Use the enclosed metal plug to seal any unused port.
Note
Apply PTFE tape or other sealant to the threads.
8. Tighten the cable gland.
Note
Apply PTFE tape or other sealant to the threads.
Note
Make sure to arrange the wiring with a drip loop.
Quick Start Guide February 2019
20 Rosemount 5300 Level Transmitter
To Next Page
Loading...
