3 Mount transmitter on tank
For flexible single lead probes ordered with weight unmounted (option code
WU), refer to Adjust probe length before mounting the transmitter.
3.1 Threaded/Flange/Tri-Clamp
®
tank connection
Procedure
1. Seal and protect the threads.
Only for NPT threaded tank connection.
Use anti-seize paste or PTFE tape according to your site procedures.
2. Mount the device on tank.
A. NPT
B. Flange
C. Gasket
Quick Start Guide February 2019
6 Rosemount 5300 Level Transmitter
To Next Page
Loading...
