Emerson UNIDRIVE M600 - Page 108

108 SI-Ethernet User Guide
Issue: 1
6.1.9 Menu 22 – EtherNet/IP Out Mappings
This menu contains the parameters used to define the destination parameters for data
that will be transmitted from the PLC.
S.21.019 Input mapping parameter 19
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, DE, PT, BU
S.21.020 Input mapping parameter 20
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, DE, PT, BU
S.22.001 Output mapping parameter 1
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
6042
(Display: 0.06.042)
Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/
IP interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, DE, PT, BU