Need help?Do you have a question about the Emerson Unidrive HS30 and is the answer not in the manual?
General| Category | AC Drive |
|---|---|
| Output Voltage | 0-Input Voltage |
| Communication Interface | CANopen |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Operating Temperature | +40°C |
| Storage Temperature | -40°C to +70°C |
| Humidity | 95% non-condensing |
| Enclosure Rating | IP20 |
| Weight | Varies by model |
| Dimensions | Varies by model |
Detailed specifications for drive models, including current, voltage, and power ratings.
Identifies and describes optional fieldbus and I/O expansion modules.
Guidelines for physical mounting, dimensions, and required clearances.
Lists required tools and recommended torque settings for installation.
Specifications for AC input voltage, phase, and frequency range.
Information on selecting and connecting external braking resistors.
Details on ground leakage currents and necessary protective measures.
Configuration and wiring for control terminals and digital inputs/outputs.
Precautions and recommendations for electromagnetic compatibility (EMC).
Explanation of the Safe Torque Off function for machine safety.
Overview of keypad buttons and drive status indications.
Procedures for saving parameters and restoring default settings.
Introduction to commonly used parameters in Menu 0 for setup.
Comprehensive explanations and settings for various drive parameters.
Step-by-step guide for powering up, setting speeds, and autotuning the motor.
List of trip codes and their corresponding conditions and descriptions.
Information on drive alarms, their meanings, and potential actions.
Instructions for installing and using the NV Media Card for parameter backup.
Overview of UL/cUL compliance, mounting, environment, and electrical ratings.
Details on internal motor overload, overspeed, and thermal memory retention.
Guidelines for group installation and a list of UL-listed accessories.
To Next Page