EMERYMARK EM 10 - Page 47

47
1.4 Parts and operation
1.4.1 Head
1. Head:
Closes the cylinder, and provides an entrance
and exit of the product.
2. Swing bushing:
It serves to join the swing to the head and to
avoid friction between both pieces.
3. Secure pressure nut:
Fix the swing to the head.
4. Pressure washer:
Press the swing against the head.
5. Swing Screw:
Screw on swing to swing safety.
6. O-Ring Extraction Lid:
Seals the extraction cover and prevents ru-
noff of the product.
7. O-Ring head door:
Seals the head and prevent runoff of the
product from the cylinder.
Head EM-20
8. Extraction Lid:
It serves to close the outflow of the
product.
9. Swing:
Its serves to open and close the
extraction lid.
10. Head Door:
Its the way in of the Liquid Mix, and water
for cleaning.
11. Swing Spring:
Allows an easy removal of the swing.
12. O-Ring Lock for Extraction Lid:
Prevents damage od the Extraction Lid.
13. Head Cap Screw:
Allows you to adjust the hear door.
14. Swing lever:
Press to close and slide the Extraction Lid.
6
9
1
7
2
3
5
4
10
1
1
12
13
14
8
Installation