55
Place the molds one at a time, from the end of the machine to the vat
front.
Prepare the second mold, slide to the right the rst mold placed and
put the second one.
When the vat is completely full with the molds, and when the popsi-
cles are frozen, please remove the rst mold and slide the molds to
the end of the machine so you can ll the vat up with another new
Any time you take one mold out, please replece the empty space
with a new one.
Never place all molds together at the same time, because the
temperature of the machine wouldn´t be appropriate so it will take a
lot of time for freezing the product.
2.4 Filling the vat
Vat
Operation
To Next Page
Loading...