3.2 Manual configuration using encryption key
1. Connect the EM4594 to a wall outlet (preferably close to the modem/router).
2. Wait for the signal indicator to flash blue. This will take approximately 1 minute.
3. Connect to the EM4594 via Wi-Fi SSID: Eminent_repeater, or use the Ethernet
cable to connect directly from your PC LAN port to the EM4594 “LAN” port
4. Open your internet browser and type http://192.168.10.1 in your internet browser
and then hit Enter.
5. The login screen will appear. Enter the Username: “admin” and Password:
“admin”, then click “Login” to login.
6. In the next step you will need to enter the WEP or WPA Passphrase of the Wi-Fi
network you wish to connect to.
Select “Repeater Wizard” from the menu.
To Next Page
Loading...
