Eminent EM6230 - User Manual

EM6230
e-CamView HD outdoor IP camera

Summary

2.0 Installing the camera

2.1 Connecting the camera to your network using a network cable

Step-by-step guide to connect the camera to the network via an Ethernet cable.

2.2 Installing the e-CamView App on an Apple;Android device

Instructions for installing and setting up the mobile application for camera access.

2.3 Installing the software and camera on a PC or notebook (Windows)

Guide to install the e-CamView software on a Windows PC.

2.4 Adding the camera to a wireless network

Options for connecting the EM6230 camera to a Wi-Fi network.

2.4.1 Connecting to Wi-Fi using the App

Steps to configure Wi-Fi connection via the mobile application.

2.4.2 Connecting to Wi-Fi using the PC utility (windows)

Steps to configure Wi-Fi connection using the Windows PC utility.

2.5 Mounting the camera on the wall

4.0 e-CamView for iPhone;iPad;Android

4.2 WIFI setting

How to configure the camera's Wi-Fi connection settings through the app.

4.3 User setting

4.5 Alarm setting

How to configure motion detection, sensitivity, and alarm events.

5.0 e-CamView for PC software

5.2 Recording settings

5.5 Network

5.7 User and password

5.11 Alarm setting

How to configure alarm triggers, sensitivity, and scheduling in PC software.

5.12 WIFI setting

6.0 The webpage of the camera

6.1 Login by Web browser

6.4 Maintenance

7.0 Upgrade Device Firmware

10.0 Warning and points of attention

11.0 Warranty conditions

Eminent EM6230 Specifications

General

Brand	Eminent
Model	EM6230
Category	IP Camera
Language	English