3.2.4 Emergency Call
When the control panel is in SOS Speed Dial mode, user just holds the [SOS] key
for 3 seconds, the LED indicator flashes once, the control panel beeps once, and the
alarm system alarms immediately.
When the control panel is not in SOS Speed Dial mode, user needs to input user
code or admin code before holding the [SOS] key for 3 seconds to send an alarm.
3.2.5 Mute Mode
Mute mode means that the LED indicators of the control panel flash, but the siren
does not beep to avoid disturbing the neighbourhood.
Input user code or admin code, and hold any key of [Arm] [Disarm] [Home Mode] for
2 seconds. The LED indicator flashes once, the control panel beeps once and sends
corresponding command to the alarm system.
When the alarm panel receives the signal, the LED
indicator lights on or off, but the siren does not beep.
To Next Page
Loading...