Emmaljunga City Cross - Seat Unit Assembly; Harness and Strap Positioning

2
3
4
1
35
Manual City Cross v. 4.3
2
1
3
3
7
8 8
6a
4a
5
5
4b
6b
7
Assembly of seat unit
• Place the shoulder straps through the holes (4a) or (4b) in the
backrest depending on the size of the child.
• Place the waist straps (5) through the holes in the seat.
• Place the crotch strap through the holes (6a) or (6b) in the base and
seat depending on the size of the child.
• Slide the shoulder pads onto the shoulder straps (7). Fasten the
shoulder straps to the waist straps with the snap clip (8).
Assembly of Seat unit and 5-point Harness
• Lift the seat adjustment lever (1). Push the backrest into its upright
position (2).
• Before assembly, release shoulder straps and waist straps from har-
ness buckle.
Slide back pocket of seat fabric (3) over seat frame backrest.
English