Emmaljunga City Cross - Strap Positioning Variations

15
14
17
18
7
11
12
13
10
13
14
37
Manual City Cross v. 4.3
16
17
19
20
Positioning of shoulder straps
Positioning from the lowest to the highest holes.
• In order to move the shoulder straps to the highest holes, rst re-
move the shoulder pads (13).
Positioning from the highest to the lowest holes.
• In order to move the shoulder straps from the highest to the lowest
holes, make the above steps in reverse order. Note that the straps do
not go through any holes in the plastic back when the highest holes
are used (17).
WARNING
• When positioning the straps to the lowest holes ensure that the
straps go around the metal pole (19) and in to the holes on the
plastic back (20).
• Remove the fabrics from the back (14) and pull out the straps
through the fabrics (15) and the plastic back (16).
• Insert the straps into the highest holes in the fabrics (17).
• Reposition the fabrics over the back (18) and reposition the shoul-
der pads
Assembly of seat unit
English