Seat
To open the seat, use the
keyhole on the side of the
bike (shown in the picture
above). Turn right to unlock
the seat, while slightly lifting
up the seat.
Circuit Breaker
The circuit breaker controls
the power running through the
bike from the battery. When
the switch is flicked on,
power flows throughout the
bike and all functions work.
When the switch is flicked
off, power does NOT flow
through the bike, and none of
the electrical aspects will
work on the bike.
WARNING!
In the winter time, fully charge the bike and turn the
circuit breaker off for proper battery maintenance.
Turn it back on once a month and fully charge the
battery to ensure maximum battery life.
Don’t leave it uncharged for extended periods of time!
To Next Page
Loading...
