EMMO Max - Remote Controller Functions; Lock and Unlock; Remote Start Operation; Bell Function

13 | P a g e
Note: If the bike is
turned on using the
remote start, it can
only be turned off
using the ‘unlock’
button on the
remote.
Remote Start
This button turns on
your bike, without the
use of the key, when it
is clicked twice in
succession. This
performs the same
actions as manually
turning the key to the
right in the ignition.
(All the functions on
the handlebar can be
used).
Bell
When this button is
clicked, the bell
sounds. (Similar sound
to the alarm) This
button is useful for
locating your bike.
Lock
This button locks
the bike. When the
bike is locked, any
physical movement
or vibrations to the
bike will cause the
alarm to sound. If
the back wheel is
moved when the
bike is locked, the
back wheel will lock
up and the alarm
will sound loudly.
Unlock
This button unlocks
the bike. It cancels
all the functions of
the ‘lock’ button.
(Alarm sounding,
back wheel lock) It
also turns the bike
off when the remote
start is activated.