EMMO Max - Left Handlebar Controls; High;Low Beam and Signals; Horn Operation

15 | P a g e
High/Low Beam Switch
Pushing the switch up
activates the high beams
for the front headlights,
pushing it down
deactivate the high
beams (make sure the
light switch is on first).
Flicking the button
downwards causes the
passing signals to
flicker.
Turning Signals
Pushing the switch to
either the left or right
positions will turn on the
respective front/rear
turning signals. Pushing
the switch in will turn
off your turning signals.
Horn
Pushing this button
sounds the horn.