EMMO Monta Pro - Accessory Mounting Torque

80
Recommended Torque Values
Frame Downtube
Controller mounting bolts 6 mm Allen 3 Nm
Frame cable cover bolts 2.5 mm Allen
tighten
securely; do not
overtighten
Rear dropout
Rear axle nuts 18 mm wrench 40 Nm
Torque arm bolt 4 mm Allen 5 Nm
Derailleur hanger mounting bolt 5 mm Allen 10 Nm
Derailleur mounting bolt 5 mm Allen 10 Nm
Derailleur cable clamp bolt 5 mm Allen 6-8 Nm
Bottom bracket
and crank
Pedal into crank arm 15 mm pedal wrench 35 Nm
Crank arm removal info
Crank puller for square
taper bottom bracket
n/a
Crank arm bolt into bottom bracket spindle 8 mm Allen 35 Nm
Freewheel removal Contact local dealer n/a
Chainring bolts 5 mm Allen 10 Nm
Kickstand mounting bolts 5 mm Allen 8 Nm
Bottom bracket and cups BBT-22 Park Tool 60 Nm