Tire
4 inch
Max. tire pressure:
40 psi
15
Tire size: 20 x 3 .0
Tube size: 20 x 3.0
4. Pedal Installation and Adjustment:
Take out pedals from the accessory box, install one of the pedals (pedals are marked with the letters "L" and "R" to indicate the side they
belong to). When installing the pedals, insert the wrench stuck on the flat end of pedal axial head, and twist into the crank in clockwise direction.
5. Check and Adjustment of Tire Pressure
Keep proper air pressure, the space between tire and ground contact is about 4 inches long when riding on the electric bicycle.
6.
Brake Adjustment
A.
When brake lever reaches 1/3 of unstressed state, the power will be cut out completely, when it is at 1/2, bike can brake completely.
B.
The distance between brake pad of front wheel and rim should not be more than 2mm, when the brake pads wear down, timely adjustment is
possible, after adjustment, the brake pad should not interfere with other spare parts. When a worn brake pad reaches 1/2 of its thickness, it must
be replaced.
To Next Page
Loading...
