Emos P5630S - Page 14

14
• Calibration can be set in EMOS GoSmart in a range of -9 °C to 9 °C with
1 °C resolution.
Open Window Function
• If the thermostatic head detects a sudden drop in temperature (e.g. when
the window or door is open), it closes the valve.
• Once the set time limit elapses or you close the window, the head automat-
ically reopens the valve.
Automatic Lock Function
• The function can be set in the EMOS GoSmart app.
• If the function is on, the screen automatically locks after 10 minutes without
any activity.
• You can unlock the screen again in EMOS GoSmart.
Setting Temperature Setting Limits for Manual Setting of the Thermostatic
Head
• Maximum temperature setting limit – species the maximum temperature
that can be set on the thermostatic head (max. 70 °C, 1 °C resolution)
• Minimum temperature setting limit – species the minimum temperature that
can be set on the thermostatic head (min. 1 °C, 1 °C resolution)
Adjusting the Valve
• The EMOS GoSmart app can be used to set the position of the valve in your
thermostatic head („Closed“, „Open“, „Normal“).
Displaying the Current Temperature in the Room
• The EMOS GoSmart app shows the current temperature in the room right on
the main page of the thermostatic head.
Child Lock
• You can activate/deactivate the child lock in the settings of the EMOS
GoSmart app.
• If the lock is active, the screen of the thermostatic head or the main page of
the head in the EMOS GoSmart app will show a lock icon.
Boost Mode
• The Boost mode can be used to heat up a room within a time you set.